|
Home > Roofing Tools > Shingle Roofing Tools > Shingle Tear-Off
Shingle Tear-Off
Show
RipCart
RipCart
Item #: RIP-1001 -
Saw Not Included. Compatible With Circular Saws by Hitachi, Makita, DeWalt, Rigid & Ryobi
A Revolution in Shingle Tear-Off
Designed for cutting shingles roofs, ridge vent openings and roof decks for total demolition. Cut multi-layer shingle roofs into manageable sections from an upright...
[more info...]
Availability: In Stock
Starting at: $495.00
|
Availability: In Stock
Starting at: $29.00
|
Availability: In Stock
Starting at: $19.95
|
AJC
Shing-Go Tear-Off Shovels
47-1/2" Wood and Fiberglass Handles, 27-1/2" Wood Shorty
(A) Shing-Go Shovel
White Ash handle, 47-1/2” length
(B) Super Shing-Go Shovel
Top-grade fiberglass handle, skid plate, extra brace reinforcement. 47-1/2” length
(C) (Red) Shing-Go...
[more info...]
Availability: In Stock
Starting at: $33.00
|
Shingle Eater
Shingle Eater 6126
Item #: 157-1010 -
55" length; 10 Teeth, General Purpose tear-off
55" length, 10 Teeth, General Purpose Tear-Off
Single Nail Pull Easily Pulls up to 16D Nails in One Shot. Ergonomic design allows work in upright position. All-steel construction. Heat-tempered foot...
[more info...]
Availability: In Stock
Starting at: $56.25
|
Shingle Eater
Shingle Eater 7126 AOR
Item #: 157-1005 -
55" length, 10 Teeth, Sit / Kneel Model
55" length; 10 Teeth, Sit / Kneel Model
The New Shingle Eater AOR is intended for use while sitting or kneeling. It features a uniquely bent handle and dual handgrips taht offer more leverage,...
[more info...]
Availability: In Stock
Starting at: $58.75
|
Shingle Eater
Shingle Eater 6127
Item #: 157-1025 -
46.5" length; 10 teeth for Steeper Pitched Roofs and men under 6 feet
46.5" length, 10 teeth for Steeper Pitched Roofs and Men Under 6 feet
Single Nail Pull Easily Pulls up to 16D Nails in One Shot. Ergonomic design allows work in upright position. All-steel...
[more info...]
Availability: In Stock
Starting at: $52.50
|
Shingle Eater
Shingle Eater 6128
Item #: 157-1027 -
36.5" length; 7 Teeth for Steep and Hard To Work Areas
36.5" length, 7 Teeth for Steep and Hard To Work Areas
Single Nail Pull Easily Pulls up to 16D Nails in One Shot. Ergonomic design allows work in upright position. All-steel construction....
[more info...]
Availability: In Stock
Starting at: $49.51
|
Shingle Eater
Shingle Eater JR
Item #: 157-1030 -
23" Length, 4 teeth for Flashing and Tight areas, Around Skylights
23" Length, 4 teeth for Flashing and Tight areas, Around Skylights
Single Nail Pull Easily Pulls up to 16D Nails in One Shot. Ergonomic design allows work in upright position. All-steel...
[more info...]
Availability: In Stock
Starting at: $28.75
|
Malco Products
Malco 24" Baby Beast Shingle Remover
Item #: MAL-SB24 -
24" Steel Handle for Roof Cap Removal and Hard to get at Dormers, Overhangs, Valley Flashings and Flashings Around Structures
Cleanly Lifts Off Heavy Loads of Shingles and Pulls Nails in One Motion
Fixed head
Replaceable blade
D-handle with foam grip
1-piece, all steel construction
Short,...
[more info...]
Availability: In Stock
Starting at: $33.50
|
Availability: In Stock
Starting at: $63.95
|
Availability: In Stock
Starting at: $51.75
|
Availability: In Stock
Starting at: $72.50
|
Shin-Dig Tools
20" Mini Shin-Dig
Item #: 155-5015 -
Use for Carpet, Tile, Shingles, Floors, Walls,Ceilings, Roofs, Plaster, Studs, Ice, Cabinets, Decks, Doors, Trim, Siding and Windows
Doubles Your Production While Sitting
Removes: Asphalt, fiberglass, asbestos, slate, cedar and tin
20" Length
The Blade:
Wide-base hardened steel alloy grasps under more...
[more info...]
Availability: In Stock
Starting at: $26.75
|
Shin-Dig Tools
48" Shin-Dig
Item #: 155-5010 -
Use for Carpet, Tile, Shingles, Floors, Walls,Ceilings, Roofs, Plaster, Studs, Ice, Cabinets, Decks, Doors, Trim, Siding and Windows
'The Work Horse', Devours Anything in its Path
Removes: Asphalt, fiberglass, asbestos, slate, cedar and tin
48" Length
The Blade:
Wide-base hardened steel alloy grasps...
[more info...]
Availability: In Stock
Starting at: $33.75
|
AJC
Thunder Ripper
Item #: 020-RF52 -
52" Tined Tear-Off Bar
52" handle
Four, 11" angular tines
One row of 50mm steel teeth to remove nails
Weighs 6.9 lbs.
[more info...]
Availability: In Stock
Starting at: $49.00
| | |
|